Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Dialing in a footing to to build a wall to close in an existing attached garage
[ 1 Answers ]
I'm in nc an inspector called me and told me to dial in a footing where I'm going to build a wall. I might drill about 8 two foot long rods into the existing 18' long footing then lay two #5 continuous rods tied to the rebars. Put some visqueen down. Here in oxford nc carolina they want the footing...
New insulation over old atic insulation
[ 1 Answers ]
Presently there are three layers of aluminum with air spaces. Can I put bats directly over this insulation and what do I have to be concerned about.
Need to run a sub panel to my attached garage for woodworking shop.
[ 5 Answers ]
Hi all! I am a woodworker and need to install a sub panel in my attached garage. The main is a 200 amp panel and my home was built in 2001. I live in AZ and spoke with the city who said they go by the NEC 2005. I was thinking of running a 60 amp sub panel as this should more than meet my...
Wiring 100amp subpanel in attached garage
[ 3 Answers ]
I would like to wire a 100amp subpanel located in an attached garage. I plan to use a 100amp breaker on the main panel for the supply. The wire will run though the attic ~30ft. I plan to run #4 copper in conduit unless recommended otherwise. I would appreciate any suggestions. Thanks. J
Attached garage not insulated
[ 9 Answers ]
I've got a ranch house with an attached garage. The garage is not in any way insulated which doesn't really bother me. What does bother me is there is no wall in the attic between the house and garage. I live in upstate NY and the winters are pretty cold up here, should I build an insulating... View more questions Search
|