 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
NIC Card Error
I just installed a netgear print server(ps121v2) and some computers print OK but some don't. Ever since I installed it I keep getting error messages showing the ethernet cable unplugged.This flashes on for 5-10 secs than goes back off and the one computer won't log onto the net. I know it's the print server cause if you unplug the rj45 from it every thing works. Is there some setting that needs changed or is this just a crummy Print server.
THANKS for any help Vinny |
||||
|
||||
|
Describe how everything is physically connected and the IP addressing settings each device is using. Logging onto the net should be unrelated to a print server unless you have some bizarre connection arrangement or conflicting IP addressing.
Resource: PS121v2 Installation Guide |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have just bought a olympus xd picture card m+2gb memory card. The instructions said that the card was already formatted and was ready to go, but when I put it in my camera the screen came up with 2 options "power off" or "format". I decided to click on format because there was nothing else to...
Hai every one! I, recenntly have had a problem in my laptop with my windows vista operatung system about some boot manager file missing! So! I have formated my entire hard disk and reinstalled my operating system. But now! I am getting a error message(not exactly) saying that my screen...
Hi All I have an Advent MP10 camera which I bought from PC World. I put in an SD card to extend the memory and had no problem. I then lent the card to my son to take some photos of his new baby which he did and returned the card to me. Putting it back in the camera brings up the message CARD...
I'm trying to run a game that requires a 3d graphics card compatible with directx 9 (or something like that). But when I start the game, it says "prism3d.exe failed to launch." I Would like to know whether my video driver is capable of handling the application 'Prism3d'. It's the Intel 945 Chipset...
Hi, I have a problem with my iPAQ, HP3950 when slot in any SD-Card. The following error message comes on the screen after slot in the card: SD detect error on 4 bit. This message comes on all SD-Cards I slot in. I have tried already soft reset and hard reset the PDA - still the same :( . The...
View more questions Search
|
