Ask Experts Questions for FREE Help !
Ask
    thumper262's Avatar
    thumper262 Posts: 10, Reputation: 1
    New Member
    		  
    #1

    May 9, 2009, 01:07 PM
    Blower motor wiring
    Replacing blower motor on intertherm package unit. Rotates slow then stops. Wiring on old motor 3 wireBLACK,YELLOW, ORANGE. NEW MOTOR , 5 WIRE 2 BROWN, BLACK, RED,PURPLE, 240 volt , 1 PH :eek: How do I wire up new motor?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    May 9, 2009, 01:43 PM

    The two brown leads connect to the capacitor (make sure you have the right one for the motor), black OR red to L1 (insulate the one you don't use, the black is the high speed and red is the low speed), and purple to L2.
    thumper262's Avatar
    thumper262 Posts: 10, Reputation: 1
    New Member
    		  
    #3

    May 9, 2009, 05:08 PM
    Quote Originally Posted by kc13 View Post
    the two brown leads connect to the capacitor (make sure you have the right one for the motor), black or red to l1 (insulate the one you don't use, the black is the high speed and red is the low speed), and purple to l2.
    Thank you very much< great help!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower Motor wiring [ 4 Answers ]

Blower motor has 4 wires +ground. 1 yellow 1 blk & 2 brwn(one with a small copper band on it) How is it to be wired to power? Which is common and which for speed? Thanks.

Wiring a Blower motor [ 4 Answers ]

I just purchased a GE 3585 model# 5KCP39JGN653T 1/3 hp 115 volts with a permanent split capacitor. I rewired the motor just as the diagram showed and the same as the old motor. From motor White(common) to cap, Brown to cap, Bk(hi) to bk, Rd(low) to rd. From Jbox the other White to cap. There was a...

Blower motor wiring [ 3 Answers ]

I recently replaced the squirrel cage on my Goodman Manuf. AR60-1 Air Handler. When I removed the blower, the wires attached to the motor detached from the furnace controls and I did not see where they were attached. There are 4 wires coming from the motor. One is the ground. One is red and it...

View more questions Search