Ask Experts Questions for FREE Help !
Ask
    Bazo's Avatar
    Bazo Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 30, 2006, 04:26 AM
    Now furnace not working
    I went back to check my connections, then turned the AC/Furnace on and got nothing .When I went down to the furnace it smeeled like something burned.I can't see any thing but I think I blew it.
    What do you think ?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Sep 30, 2006, 04:34 AM
    About the only thing you could have burnt out is the control transformer, or perhaps a relay, but most likely the transformer
    rickdb1's Avatar
    rickdb1 Posts: 185, Reputation: 15
    Junior Member
    		  
    #3

    Sep 30, 2006, 06:41 AM
    Might have also toasted the heat anticipator in the thermostat too...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas furnace [ 2 Answers ]

For the past 2 nights my furnace has been blowing out cold air. I have a furnace which is equipped with an ignition device which automatically lights the piolet. I did everything from cutting off the gas valve and power to furnace. When I restarted everything back up, the furnace came on but no air...

Gas furnace [ 14 Answers ]

Igot a 1972 carrer furnace it catches fire at the spud part of burner I got 11.5 inch watter column preasure on line you can cut it off turn it back on and it burns good blaze looks good I need some comet on air ajustment or what might be causing this I have cleaned the burners , thanks.

Furnace [ 3 Answers ]

I have what looks to be a old steam boiler. Any recommendations? I was told that I needed about 100,000 btu's. I know that I will have to get the system size correctly to be sure. But I wanted to find out if there is any particular brands that are good before I start getting quotes. I personal...

New furnace [ 9 Answers ]

I have got an old furnace I am going to have to replace eventually. I was looking for general advice right now what I should know when finding someone to replace it. I don't want to get into a situation where it will cost me thousands of dollars when I don't need to. I have a gas furnace with hot...

Furnace fan [ 2 Answers ]

I have a forced-air gas furnace w/o AC and a simple dial-type heat-only thermostat.  How do I change my system so that I can manually operate the furnace fan when not calling for heat? Merlyn

View more questions Search