Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
MTD lawn tractor starter problem
[ 2 Answers ]
I've got a MTD lawn tractor 12.5 briggs have the same problem that was posted earlier. I did jump start it and the starter works. I changed the switch and solenoid. The switch will kill the engine. When I turn it to start it will not engage the starter. If I jump across solenoid which is under the...
Electrical Problem Murray Riding Mower
[ 8 Answers ]
I was given a Murray Riding Mower that had nothing when the key was turned . I replaced the blade disengage safety switch and the mower started. I get nothing again when the key is turned. I replaced the cellenoid, battery, BDS switch again, and had the starter checked. The seat safety was...
Honda riding mower problem
[ 4 Answers ]
I have an older Honda 3011 Riding Mower that won't start without jump starting it. I just replaced the battery with a new one and I checked it with a voltmeter and it reads 11.8... I seem to remember car batterys usually reading 13+ so is this OK or too low? I have already checked the belts,...
New year, new problem with MTD tractor
[ 7 Answers ]
When I last parked my 2002 MTD tractor (16.5 hp I/C Briggs), it was fine. I winterized it and kept it covered until this spring. Now it will not start for anything. It has a new starter, battery, solenoid, and coil. The carb was also rebuilt. I only put a few hours on it last summer after the...
Riding Mower Problem
[ 1 Answers ]
My son has an old Lawn Chief riding mower that he purchased used. I finally got it started, but had to do so by shorting out the solenoid with a screwdriver to get it to turn over. Are any manuals available for these lawn mowers? The other idea I had was to put in a heavy duty push button... View more questions Search
|