Ask Experts Questions for FREE Help !
Ask
    fernans9's Avatar
    fernans9 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 5, 2009, 09:54 PM
    GFI vs AFI circuit breaker
    What is the differnce between a gfi and afi circuit breaker
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    May 6, 2009, 03:51 AM
    Google is your friend.

    There is so much information about this on the web it is not worth typing about it.

    AFCI guide to arc fault interrupters for home owners and home inspectors: how to buy, install, test, & inspect AFCIs a little more than half way down the page.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Theory of vacuum Circuit Breaker & sf6 circuit breaker [ 15 Answers ]

I want to know about the basic Theory of vacuum Circuit Breaker & sf6 circuit breaker

Gfci breaker + outlet in same circuit.breaker tripping [ 4 Answers ]

I have a gfci breaker for a bathroom and there is an additional gfci outlet in the bathroom on the same circuit. The breaker was tripping intermittently over the past week and now will not re-engage. Should I suspect a faulty breaker or is it better to troubleshoot the circuit first? The...

Replacing Circuit Breaker with Higher AMP Breaker [ 8 Answers ]

Excuse me, I did look at the code book as is suggested in your Sticky. The NFPA may answer this question, but I am not knowledgeable enough to recognize it: Our offices are upstairs in an older (renovated home) building with modern wiring. We have 4 computers, 3 printers, and miscellaneous with...

Circuit breaker [ 5 Answers ]

How can I check a circuit breaker, several switches/plugs do not work, but none of the breakers is tripped.

Replacing a circuit breaker with a GFI breaker- q on neutrals [ 1 Answers ]

In process on installing withquestion on neutral wires. Do you take the neutrals out of the in the main panel neutral and put them in into the breaker where its labelled "load neutral terminal" and only have the neutral "pig tail" to the panel neutral bar? Thanks!

View more questions Search