Ask Experts Questions for FREE Help !
Ask
    jeffxchl's Avatar
    jeffxchl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 4, 2009, 06:21 AM
    Installing Hampton Bay Ceiling Fan
    Good Day,
    I just finished installing a Hampton Bay "Redington IV" ceiling fan with wireless remote. It is completely wired and everything works. My problem is that I cannot fit the yellow wireless remove receiver into the canopy. No matter which way I have tried to fit it in, it doesn't fit completely allowing me to secure the canopy to the ceiling. Is there a trick to this? Please, I hope you have an answer. Thanks.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 4, 2009, 06:47 AM

    The trick is very small fingers, keep trying it is tight but it will fit. Does yourmanual show a picture to follow?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    May 4, 2009, 09:13 PM

    Is this the receiver and bracket with the U shape?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Ceiling Fan ac-552 [ 4 Answers ]

Hampton bay ac-552 (sku#474-628) "kk" I have this fan on the ceiling and it needs to be removed. Previous owner put it there. I can not figure out how to remove it. Amazing! I have removed the blades But there are no screws or obvious ways to remove it! Where can I get the owner's manual? Can...

Installing Hampton Bay Eastridge Ceiling Fan [ 7 Answers ]

My new ceiling fan came without installation instructions. Having installed 3 other fans the same week I attempted to install this one. To no avail... It did not work. I have two switches: one that controls the lights on the fan and one for the fan itself on the previous fan that I am replacing....

Installing Hampton Bay 3 level touch dimmer [ 1 Answers ]

I have installed a three level touch dimmer from Hampton Bay, purchased at Home Depot. It consists of a touch pad and power strip. The touch pad connects to the power strip and my Xenon under-the-counter five puck lights plug into the power strip. The lights work if I connect them directly to...

Hampton Bay Ceiling Fan [ 1 Answers ]

I have a Hampton Bay Remington III ceiling fan. The fan and light are operated by a remote unit. The light will not turn on. I have changed the battery in the remote and this doesn't help. I have tried all of the dip swithch combinations in the remote unit, and this didn't work either. Any...

Hampton Bay Ceiling Fan [ 2 Answers ]

What is the shortest blade that I can buy for a Hampton Bay fan? Where would I buy them? I'm afraid if my fan wobbles more than 1/2 inch, it will hit the wall. Thank you.

View more questions Search