Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing a shower.
[ 4 Answers ]
Hi. I'm replacing a shower that was a one-piece moulded unit. It leaked, so I bought a replacement unit to install. All is fine, except when I go to connect the drain. The trap and drain is 1 1/2" pipe and there is a nut at the top of the pipe. The drain that I have is for a 2" pipe and is...
Replacing tub with a shower pan
[ 1 Answers ]
I am thinking about replacing a tub with a shower pan. Can I get a right drain shower pan and connect to the existing 1.5 inch ABS drain pipe? If so is there a kit available? How does the pan drain connect to the existing drain line? Or is it a matter of going from 3 inch to 2 inch to 1.5 inch? Are...
Replacing a Shower with a Toilet
[ 3 Answers ]
Hi, I am wondering if something special needs to be done with the drain opening in the floor of a tiled shower. I would like to move the toilet to this location. Are the openings the same size? Is there a p-trap below the shower floor I can't see? Any gases I need to worry about? Am I...
Replacing sunken tub with shower
[ 3 Answers ]
Hello. I have removed a sunken tub from a rancher built on a slab. There is a 6 inch well which allowed the sunken tub. I am putting in a barrier free prefab shower base. The shower base will take up the same area as the old tub, but the special purchase shower base has the drain in the centre...
Replacing existing shower set
[ 3 Answers ]
Hi, I was a HomeDepot Expo today to buy new shower sets to replace the ones in our existing house (about 10 years old) and they told me something I wasn't sure was true. They said I should replace the old shower set (handles and shower head) with the same brand as the old one unless I planned to... View more questions Search
|