Ask Experts Questions for FREE Help !
Ask
    wallace123's Avatar
    wallace123 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 1, 2009, 02:46 PM
    Themostat Wiring
    I am replacing a 4 wire thermostat with another 4 wire thermostat. It is a different manufacturer (Rona).

    I have four wires coloured Red, White, Black and Blue.

    I need to know which colour Fan Relay, Cooling Relay and Heating Relay?
    cehs's Avatar
    cehs Posts: 3, Reputation: 1
    New Member
     
    #2

    May 1, 2009, 08:24 PM
    Green goes to fan relay
    White goes to heating relay
    Blue goes to cooling relay (blue often is used INSTEAD of yellow)

    Hope this helps.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #3

    May 2, 2009, 07:19 AM

    White those colors you have listed there is now way to tell how the installer wired it. You will have to look at the furnace and mark down what color is where accordingly
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #4

    May 2, 2009, 07:20 AM
    But if I wired it

    It would go
    Red-r
    White-w
    Blue-y
    And black-g
    But thiss would be just a guess
    cehs's Avatar
    cehs Posts: 3, Reputation: 1
    New Member
     
    #5

    May 2, 2009, 11:53 AM
    Quote Originally Posted by Joshdta View Post
    But if i wired it

    it would go
    red-r
    white-w
    blue-y
    and black-g
    but thiss would be just a guess
    This is correct unless someone has done something different at the factory.
    I would need to SEE the wireing diagram from inside the heating/air handler unit to be sure.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

HoneyWell Themostat wiring [ 3 Answers ]

Hi, Currently I have a Honeywell analog(mercury) thermostat which I'm trying to replace with Honeywell RTH6300B. When I look at the current mercury stat wiring its lot different. I see a red wire connected to unmarked place. I see a yellow wire connected to something marked as "2" and a white wire...

Wiring themostat to wood/furnace [ 2 Answers ]

Hey there trying to wire a themostat to a newmac wg-100 wood/coal furance I live in what use to be a duplex home, converted into one living area. Theromostats are summaire 1 upstairs has red white green and black wires, down stairs has black and white wires. The furnace has a fan draft on it,...

Wiring a robertshaw 9610 themostat [ 1 Answers ]

I have five wires red,white,yellow,blue and green where do I wire them to the Robershaw 9610 model themostat?

New themostat [ 2 Answers ]

I have just bought a new programmable themostat and in the directions it says it is not compatible with a mulistage furnace. My furnace is a Lennox Pulse.

Themostat wiring installation [ 1 Answers ]

I just bought a new themostart to replace with the old one I only have heating and the wiring diagram showing I have to connect one to R and one to W(heating relay) The wire I have from the wall one is red and one is white which I don't know which one should I connect to the R and which one...


View more questions Search