 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Hampton Bay ceiling fan and the fan switch went bad so I bought a new one but I don't know how to connect the wires since the old switch was broken and some wires were not connected to it. I have a yellow and a blue wire from the capacitor, a black one that comes from the power source and...
Hi I have a four way switch in place so that there are 3 switches in our hall to work the one bulb. I replaced all switches with a chrome finish and everything was great until I forgot to label the wires on the four way, now I have the four way with four wires but I have no idea where they all go....
First of all I want to thank these forums for helping my family get heat tonight. I woke up at about 3am knowing something was wrong. Sure enough the heater wasn't heating. After looking over the heater myself and seeing a red blinking light I came to the panel that showed this was a ...
Yesterday I installed a new Hunter ceiling fan. I also purchased a Hampton Bay wireless wall switch. Everything went well until I wired up the remote receiver. The receiver has a blue wire for the light that is supposed to connect to the blue wire (light) from the fan. The Hunter fan does not have...
View more questions Search
|
