Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Soffit overhang
[ 6 Answers ]
I have a colonial with a cantilevered overhang that was covered with aluminum soffit panels when the house was vinyl sided. I donot believe that they insulated in between the joist of the overhang. Do you think it would be possible to remove the metal soffit panels and insulate between the joist...
Soffit and roofing
[ 3 Answers ]
I am setting my truss's tomorrow and putting on my fascia board and plywood, I want to know if I need to get the fascia system on my board before I start felt paper and shingles, or if I can deal with the fascia system and soffit at a later time. But I would like to get my roof done as soon as...
Soffit materials
[ 1 Answers ]
Have had some problem with ice dams on my garage roof which resulted in leakage through the roofing and into the soffitts below. Am planning on replacing the soffitts with a material that would not require any painting, either vinyl or metal. I think over the next few months I will have to replace...
Cantilevered soffit overhang
[ 2 Answers ]
Thank you very much for your answers but I know not to stop air flow in the soffit for a roof. I apologize for not explaining the question correctly. The overhang that Iam talking about is not the one for the roof. This overhang is a overhang which is cantilevered over the top plate of the first...
Kitchen soffit
[ 1 Answers ]
Hi, We’re remodelling the kitchen with medium cherry cabinets, red black brown bordeaux granite on the U shaped countertop & tumbled stone backsplash. The off side of the counter is pictured framed and painted almond to pick up a color in the tumbled stone. The question is what to... View more questions Search
|