Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Lead toilet flange
[ 8 Answers ]
I removed my old toilet to replace it and the old flange was a brass ring and a lead flange bent over the ring the lead flange is connected to a copper waste line. I straightened the lead out carefully and removed the brass ring and replaced some of the floor. Now I want to put a new flange in. ...
Lead toilet flange
[ 1 Answers ]
Private Message: lead toilet flange Yesterday, 06:37 PM Redjames New Member Join Date: Mar 2008 Posts: 1 He I saw some of your postings as was wondering if I could ask you a question. I removed my old toilet to replace it and the old flange was a brass ring and a lead flange bent...
Lead Bend Toilet Flange
[ 4 Answers ]
I think I have a real problem. In a bathroom remodel the plumbers left a 4" lead bend with about 6 inches above the new floor height. The tiling contractor cut the lead bend even with the floor, (about 1/4 inch above the tile). I gather from other wuestions that I don't have enough lead pipe to...
Replacing a toilet flange with a lead connection
[ 6 Answers ]
I am about to pull up my old toilet and take a close look at what's underneath. I am also going to go over the original plank sub-floor with fresh 3/8" ply (followed later with thin lauan for eventual linoleum) there is a visible floor patch from an old repair. Given the fact that there has been a... View more questions Search
|