Ask Experts Questions for FREE Help !
Ask
    Charley8's Avatar
    Charley8 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Apr 24, 2009, 05:15 PM
    Fan works, breaker is on, pilot is on. No heat
    When I move thermostat to heat nothing happens no usual click from the furnace. Fan works checked breaker pilot is on.What is the part in the furnace that the thermostat turns on to start the heat and or what else could this be
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Apr 24, 2009, 05:35 PM

    Take off your t-stat and touch between r-w with a wire and see if it comes on.
    Charley8's Avatar
    Charley8 Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Apr 24, 2009, 05:44 PM
    Did that nothing happened no low voltage spark
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #4

    Apr 24, 2009, 05:56 PM

    Check to see if you have 24 volts coming out of you transformer
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

AC works Heat doesn't [ 4 Answers ]

Not sure why when I turn on my AC the unit comes on. When I flip it to heat, nothing happens. It worked the other night and I stayed warm. Woke up this morning freezing. Anyone have any ideas... suggestions?? I checked the breaker box and nothing was tripped. Thanks!

My dryer only works on low heat and not on high heat. [ 1 Answers ]

I have Whirlpool dryer model #TEDX640EQ1. The dryer does not produce any heat when on the high heat setting, but will get warm on the low heat setting. I need the high heat setting to work so that it doesn't take 2 cycles or more to properly dry my clothes. Anyone know what the problem could...

Ac works, but no heat [ 1 Answers ]

My downstairs unit will not turn on when the thermostat clicks the heat on. The ac turns on, abd the upstairs unit works fine. Why would the unit not work for heat?

3 yr old heat pump, heat works, no cool [ 10 Answers ]

I have a heat pump that was 3 years old in May. We went to change from heating to cooling about a month ago. I noticed later that it wasn't cooling. Checked and found it had tripped the breaker. Reset and instantly threw the breaker again. Called a friend that does A/C work on the side. We...

Concord 80 +: No heat; pilot out [ 1 Answers ]

Concord 80 + gas furnace will not ignite burners. Issue: Draft blower turns on but no ignitition of gas burners and main blower does not turn on. Investigation: (1) LED is solid, no flshing (2) Looked inside and saw 4 gas outlets that I think are the pilot lights and they are not lit. (3)...

View more questions Search