 |
|
|
 |
New Member
|
|
Apr 23, 2009, 01:40 PM
|
|
Installing my new cooktop
Hi folks
I am remodeling my home and I just baught a new cooktop that I need to install, I am installing it where my old stove was plug in, a 4 prong plug is already there but I have one problem my new cooktop only have 3 prong and its hard wired ,How do I know if my old stove and my new one uses the same 120v or 240v and can I change the hard wire on my new cooktop to a 4 prong where I can just plug it in
Thanks please help.:confused:
|
|
 |
Uber Member
|
|
Apr 23, 2009, 01:49 PM
|
|
Basics:
Power requirements for new cooktop?
Breaker size in fuse box for stove?
|
|
 |
Electrical & Lighting Expert
|
|
Apr 23, 2009, 02:01 PM
|
|
Cable size of the existing range circuit?
|
|
 |
New Member
|
|
Apr 23, 2009, 02:02 PM
|
|
The power requirements for new cooktop is 3 or 4 wire cable,240/208 volt,60hertz,ac only electrical supply with groung. As far as for braeker fuse box I have no idea
|
|
 |
New Member
|
|
Apr 23, 2009, 02:17 PM
|
|
 Originally Posted by stanfortyman
Cable size of the existing range circuit?
The power requirements for new cooktop is 3 or 4 wire cable,240/208 volt,60hertz,ac only electrical supply with groung. As far as for braeker fuse box I have no idea
|
|
 |
Printers & Electronics Expert
|
|
Apr 23, 2009, 02:40 PM
|
|
Some questions for you:
Please define how you are using the term "Hard-wire"? Are you referring to an armor covered cable on the bottom of the range top?
Typically, a range/oven requires a 40 amp circuit. A cooktop usually requires a 30 amp circuit. Please check your main panel and let us know which breaker you have for the range circuit.
Tell me about the cable for the range, is it a Black - Red - White and bare ground? Or is it a Black - Red - White and green configuration?
|
|
 |
New Member
|
|
Apr 23, 2009, 03:38 PM
|
|
What I mean by hard wire is the plug is missing from the eng,but yes its three wire red,green,black and help me here what do u mean the main panel and where is it located
|
|
 |
New Member
|
|
Apr 23, 2009, 03:45 PM
|
|
And yes the range oven is a 40amp
|
|
 |
Electrical & Lighting Expert
|
|
Apr 23, 2009, 05:33 PM
|
|
tearaap, I have to say, from the replies and information I am seeing I really don't feel comfortable giving any more advice. I think this is way over your head.
I wish you luck and hope you get it worked out.
|
|
 |
Ultra Member
|
|
Apr 24, 2009, 12:11 AM
|
|
Hi tearaap
I agree with stanfortyman. This is very dangerous to work on if u do not have to knowledge and experience to do it.
Get estimates from at least 3 licensed electricians and go from there.
Good luck
Chuck
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Electric cooktop
[ 9 Answers ]
This seems a bit strange to me, but I bought a brand new electric cooktop with three wires coming off it. The ground and two hots. So there's a black, red and green wire. So what do I do with the neutral coming out of the wall? I don't have a wire to connect it to.
I need to run a gas line to a new cooktop.
[ 3 Answers ]
I am remodeling my kitchen and I used to have an electric range and now I have a gas cooktop and a double oven (the oven is electric). I have gas to the water heater, but nowhere else in the house. Just need to know if there is specific type if line to use and if there are codes as to where it has...
Air exhaust for a Gas cooktop
[ 1 Answers ]
When using a gas cooktop in a kitchen, is it okay to recirculate the air with an exhaust fan or must the fan be vented outside?
Gas cooktop
[ 1 Answers ]
Who invented the gas cooktop and in what year?
Propane cooktop
[ 1 Answers ]
I have a GE gas cooktop that runs on propane. It doesn't seem very powerful, I have used much cheaper stoves that run on propane that boil water much faster. Is there any way I can increase its output ?
View more questions
Search
|