Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to support a load bearing wall, need engineer, cement wall
[ 3 Answers ]
I want to remove about 6 feet from an interior wall. The rafters run parallel with the wall but the reason I think it's load-bearing is because one of the trusses rests on the middle of the wall with a lateral x across it. I have existing pictures and a drawing of "the existing" and what is...
Pouring a concrete wall in front of a damaged cinder block wall
[ 1 Answers ]
I need to repair a well house that has buckling cinder block walls. The well is below ground with a shed above it. The room is approximately 9' x 8' and 8' tall with cinder block walls and a concrete floor. The block did not have concrete poured in it when it was built, the blocks are beginning...
Kids Father talks bad on ex-wife and me in front of kids
[ 3 Answers ]
Not sure if this is the right place for this, if not, admins please move to the appropriate section. Thanks Now for the question, I have been seeing my girlfriend for almost 7 months now. We do live together with her 2 beautiful girls who I adore and treat as my own. They are 5 and 3 and...
Installing wall remote for ceiling fan into wall switch
[ 3 Answers ]
I've had no luck with getting the wall remote on my Hampton Bay ceiling fan to work. I was able to get the fan to work with the wall switch, but once I change out the switch with the wall remote it doesn't work. The l.e.d. on the wall remote is not even lighting. There are 6 switches on the...
Installing half wall in load bearing wall
[ 3 Answers ]
We are attempting to make our kitchen open concept with our living/dining room by creating either a half wall or putting in a window (what is the correct name for that?) The wall is load bearing. Do we need a permit for that type of reno? What would be a realistic budget to set aside for that... View more questions Search
|