Ask Experts Questions for FREE Help !
Ask
    millardb8's Avatar
    millardb8 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 18, 2009, 10:17 PM
    installing new thermostat.
    I want to install a Honeywell programmable electronic thermostat #rth230b,
    to replace a rheem hvac model # rcha-36a1as17/ heating & air conditioning thermostat. The panel connectors look like this,
    L B 2 O X R Y G E W.
    3

    THE JUMPER wire is installed on x.
    wire connectors are,
    (b) black wire.
    (2) white wire.
    (x) jumper brown/ yellow wires
    ( r) red wire.
    (y) yellow wire.
    (g) green wire. :confused:
    lawnman14's Avatar
    lawnman14 Posts: 37, Reputation: 0
    Junior Member
    		  
    #2

    Apr 20, 2009, 10:40 AM

    Send me private message of a picture of the new thermostate together and apart so I can see were to connect it and also send me if possible pictures of the manual
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #3

    Apr 20, 2009, 02:44 PM

    Is this unit for gas heat and a ac, or a heatpump?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing new thermostat [ 15 Answers ]

I recently bought an older home, picked up a Hunter Digital Thermostat in order to change out the old one. Ok, I'll bite the bullet-----I forgot to label the colors on the thermostat wires prior to removing them, thinking they corresponded to the color coding on the thermostat. Now it is 80 degrees...

Installing new thermostat [ 2 Answers ]

I need some info on how to wire from a Hunter 44155c thermostat to a Honeywell RTH110B thermostat.there is nothing showing which wire installation from the old thermostat

Installing a thermostat [ 1 Answers ]

When you put a new thermostat in is it easy to install do you just put the green wire were the g is and the red wire were the r is and so on?

Installing a two wir thermostat [ 2 Answers ]

I am tryig to install a two wire thermostat in a mobile home. The wires are not marked. It is a manual 24 volt thermostat with markings G,Y,W,RH,B,O,RC with RH and RC already connected. It is a red and white wire going to the blower that connect red to red and white to green. Please HELP!:confused:

View more questions Search