Ask Experts Questions for FREE Help !
Ask
    lmtpop's Avatar
    lmtpop Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 17, 2009, 07:17 AM
    Washer will not fill on rinse cycle
    I have replaced the hot/cold water valve and the washer still will not fill on the rinse cycle. This only effects the cold water rinse warm or hot works fine. Help!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Apr 18, 2009, 01:39 PM
    It is possible that the timmer is not activating the water valve on the rinse cycle.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Washer Won't Fill on Rinse Cycle [ 2 Answers ]

Everything else is working fine, it fills normal on wash, but not rinse, no matter what cycle such as perm press, ultraclean.

Kenmore washer won't fill with water, but rinse works [ 1 Answers ]

Help! My kenmore washer won't fill with water during the wash cycle, but the rinse and spin cycle seems to be working fine. When I turn the knob to "wash" nothing happens. Even my handy man father was stumped on this one!! Can anyone help?

Washer does not switch to rinse cycle [ 1 Answers ]

My Whirlpool washer goes through to the rinse cycle and then stops. If I turn dial into the rinse cycle zone it then continues. Does it sound like the timer has gone bad?

Washer won't run the rinse cycle! [ 4 Answers ]

Does anyone have any idea what's wrong? Actually, no cold water is coming into the washer and YES the valve is open. Since there is no cold water... no rinse cycle. I have to rinse my clothes by starting it over and fill it with hot water.

View more questions Search