[kasper37]

I recently purchase a replacement switch for an electric sewer auger model k-38 I wired it exactly the same way the other one was, however upon connecting the machine to the power source the machine turned automatically on without activating the switch.. does any one have a wiring schematic for wiring the switch.. a blue print will help. The switch is a trigger activating switch with a forward and reverse feature.. please help.

[ballengerb1]

Is this a toggle switch or a push switch?

[ohb0b]

I recently purchase a replacement switch for an electric sewer auger model k-38 i wired it exactly the same way the other one was, however upon connecting the machine to the power source the machine turned automatically on without activating the switch.. does any one have a wiring schematic for wiring the switch.. a blue print will help. the switch is a trigger activating switch with a forward and reverse feature.. please help.

Are there three wires on the switch?

If there are, and you put it back the same way as the old one, and it turns on when you plug it in, there are only two things that can be wrong:

1. The wires are touching each other
2. The switch is defective.

If you wire the switch wrong, there are only two possibilities:
1. The tool will not operate at all
2. The tool will operate in one direction but not the other

[stanfortyman]

kasper37, what brand is the switch? Using just what information you provided brings up nothing doing a search.

Are you in the US?