 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a weedeater which was running OK until the gas line went bad. Since I replaced it it will not run. If I squirt fuel into the carb it will run but never on it's own. I have since Replace the Carb gasket, I see fuel in the new line and at times see AIR BUBBLES in the gas line from the...
I bought a used tmc gas trimmer. I can't get it started. I primed gas into the carb (it does not stream spray) but there's gas. I even sprayed started fluied in there and it won't fire up. What do I do next
Hi everyone! Just how do I restring my Yardmachines model ZR700R string trimmer? The manual did'nt come with any instructions as to how to do so, and my lawn's edge is just lovin' not receiving any attention. Thanks, tbj
I need to know how to put new string on an echo trimmer
I have Mac trimmer power head that I picked up to tinker with - I believe it's a 28 cc (Roadrunner). I've got it running, but at full throttle it makes this loud knocking sound that I'm having trouble figuring out - despite taking it down a couple of times. It will occasionally backfire too. The...
View more questions Search
|
