Ask Experts Questions for FREE Help !
Ask
    SANTEE SUPPLY's Avatar
    SANTEE SUPPLY Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 11, 2009, 02:56 PM
    Five Hole Sink Faucet
    I am looking for an 8" deck mount faucet for a three compartment home sink. Compartments are Bowl-Disposer-Bowl. Faucet setup is: (1) Soap Dispenser (2) Pull up for left compartment Basket (3) Single lever faucet and spout (4) Pull up for right compartment Basket (5) Hose & spray.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Apr 11, 2009, 04:44 PM
    Quote Originally Posted by SANTEE SUPPLY View Post
    I am looking for an 8" deck mount faucet for a three compartment home sink. Compartments are Bowl-Disposer-Bowl. Faucet setup is: (1) Soap Dispenser (2) Pull up for left compartment Basket (3) Single lever faucet and spout (4) Pull up for right compartment Basket (5) Hose & spray.
    You're going to hafta be a little more informative then that. You have a three tub five hole sink, yes?
    What's a Pull up for left compartment Basket? Sounds like a pop-up drain. Could you be counting the drain as one of the holes? You ask for a 8 inch center faucet with a spray attachment but with a 8: center faucet that will need two holes to mount will need six holes to jam everything that you've listed. On that poor sink. Either I'm too dense to understand or you better re post your question. Can you post a picture? Regards, tom
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #3

    Apr 11, 2009, 07:15 PM

    Here is a site for you to look at, I am not sure if you are wanting the holes in the sink or in the counter top but this gives you a choice.

    American Standard 7183.805.208 White Heat Silhouette Triple Basin Americast.. (Write A Review)

    Americast brand engineered material 5-Hole Glossy porcelain finish Triple bowl design Self-rimming or undercounter installation Available CHO, 3, 4, or 5 faucet hole configuration




    Triple Basin - Sinks - Compare prices at Sortprice.com - Lowest Prices
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #4

    Apr 12, 2009, 05:58 AM
    Letmetellu,

    Go back and read the question. Santee's looking for a faucet and you're showing him sinks. He says he already has a three compartment sink and is looking for a 8" center deck faucet that will work on a sink this size. Regards, tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

4 Hole Kitchen Faucet Template [ 1 Answers ]

I am installing a 4 hole Price Pfister kitchen faucet in a corian counter top. There is currently a single hole faucet there and I need to locate a template to use for the holes. Is there anywhere I can print the template from? I am very handy, but never too proud to take suggestions. Thank you

Hole in my sink drain [ 6 Answers ]

Hello, I have a very little hole in my sink drain, but it is located inside the wall, can I repair this hole without destroying the wall?

Bath faucet hole expansion [ 2 Answers ]

I am in the processing of installing a brand new wall mount faucet in an older cast iron bath sink but I'm finding that the center faucet hole in the sink isn't quite large enough for both the spout and the push rod. How can I expand the hole or drill a new one to make room for both parts without...

Corian Counter-Faucet Hole too small [ 1 Answers ]

I'm trying to replace a kitchen faucet. The center hole is too small in the Corian counter. It's pretty close though. The hole probably only needs to expand by the width of the treads on the faucet, maybe 1/8". Any ideas on how to enlarge the hole without cracking the counter?

Sink w/o overflow hole [ 9 Answers ]

I just had a home inspection on a house I am considering buying. The inspector mentioned that the 2nd floor bathroom sinks did not have overflow holes. Is this a Uniform Plumbing Code violation?

View more questions Search