Ask Experts Questions for FREE Help !
Ask
    chrislance's Avatar
    chrislance Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 8, 2009, 07:42 PM
    Ceiling fan motor
    My ceiling fan will not keep a constance speed. It has already blown out the remote receiving unit. Is my motor bad or something else. Where can one buy a new ceiling fan motor. I would like to keep the same housing, blades and upper and lower lighting. Please help!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Apr 9, 2009, 03:06 PM

    What make is the fan?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling Fan Motor Hum [ 3 Answers ]

I installed two Hunter Bay San Marino 36" ceiling fans with lights. They both work fine, except there is a noticeable motor hum when the fan is turned on low and gets noisier when switched to medium and high. Will low 110 VAC do this? Thank you. VChang

Where can I buy a ceiling fan motor? [ 5 Answers ]

I'm looking to make a ceiling fan out of an old propeller. Does anyone know where I can purchase a suitable motor, like an Emerson K55XL?

Ceiling Fan Motor [ 2 Answers ]

Installed a new ceiling fan a month ago. Everything was working fine (except for the excessive noise when fan was rotating at a slower speed). Last night the highest speed setting was not working, medium was working fine, low was working fine. The highest speed setting was rotating at the medium...

Corrosion on a ceiling fan motor [ 1 Answers ]

My fan powers up but does not spin. After taking the fan apart I saw that there was corrosion on a couple of coils and 2 wires are split. It looks as if the wires shorted out and flash burned a small part of the motor coils, along with the wires. Can this motor be fixed and/or made to work...

Ceiling Fan Motor Noise [ 1 Answers ]

I have installed 4 ceiling fans (2 Hampton Bay and 2 Hunter) and experienced the same thing. A humming sound from the motors on all of them. I used 12G wiring and spliced into 12G existing wiring in the attic. The mfrs don't understand why - one has asked if I have enough power going to them. ...


View more questions Search