Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Radon
[ 2 Answers ]
I purchased a short term radon testing kit because I have been reading so much about radon poisoning in the news. I sent my kit in and my results came back that we have an averave radon level of 5.0 pCi/L this is above the recommended amount, but not terribly high. Soes it matter that the test...
ABS vs PVC gases
[ 3 Answers ]
I am a former handyman. One of my current co-workers made the comment that ABS is approved for use with pressurized gases ( compressed air ) and PVC is not. I disagree ! I have only seen ABS used for DVW. If I am wrong can anyone tell me the reference on this ?
Radon and a dap out
[ 5 Answers ]
Hello, I am in the process of sealing the slab in my house with a product claiming to greatly reduce radon gas by sealing the concrete. It also reduces mositure. Since I have a bit of both I hope this RadonSeal will work. While tearing up the carpet and preping the floor (scarifing , cleaning...
Venting radon
[ 3 Answers ]
Can radon just be vented out the roof just like a soil stack vent with out use of a power fan? Any comments are welcome Thanks for your time
Venting bathroom exhaust into radon pipe
[ 3 Answers ]
We are building a second floor bathroom over a first floor bathroom. We are draining (and venting) the fixtures into the vent for first floor fixtures (creating a wet stack, which I understand may not be to code, but will function properly?). Question: we will also have an exhaust fan over the... View more questions Search
|