| 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Correct capacitor and motor wiring
 [ 4 Answers ]
 Hi, I installed a new emerson condenser fan motor on a lennox unit and for you guys with a johnstone catalog it was the s88-502 and called for the g21-933 capacitor which is a 7.5 370 volt. They didn't have that capacitor in stock and gave me the g32-480 which is 50.0/7.5 440 volt. Is this OK? Is... 
Correct wiring
 [ 2 Answers ]
 I need to fit a new extractor fan in the shower room, as the old one burnt out due to water ingress. The fan I have to install has two connections to attach to the wiring coming from the ceiling, The wiring from the ceiling is in the form of two thick grey wires, having a red and black in each... 
Correct wiring for a thermostat
 [ 5 Answers ]
 Installing a new Honeywell thermostat to a Carrier system . Old thermostat was already removed before I got there. Wires from the wall are Red,Blue,White,Yellow and Grenn. Thermostat terminals are RH,RC,W,Y,G. I currently have it rigged up as follows Red to RH Blue to RC White to W Yellow to... 
Not sure about correct wiring
 [ 1 Answers ]
 Appreciate any help here: I'm drawing my source from a kitchen light. This set of wires continues to a junction box in my attic. This junction box has four separate wires leading into it. One from the source that I just described. Two other wires lead to separate switches in the kitchen (one of... View more questions Search 
 |