Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Comfortmaker Furnace Help
[ 4 Answers ]
My Comfortmaker Furance (GUG070A012N) will not always kick-in at the set temp level. The Thermostat is verified operational and good. Most times the heat will kick in, but the fan blower will not run. If I remove the panel and spin the fan manually, sometimes this will engage the fan and the...
Comfortmaker Furnace
[ 1 Answers ]
My comfortmaker furnace doesn't have enough upward angle on the exhuast to create the external pressure needed for the furnace to run. So, the furnace comes on and cuts off. My water heater has a fan on the exhaust so that when it kicks on the exhaust fan comes on and helps exhaust the gas...
Comfortmaker furnace
[ 1 Answers ]
Our furnace has been working fine, but now all of a sudden only one of the three burners will ignite. This does not happen all the time, What could be the problem
Comfortmaker Furnace
[ 2 Answers ]
I recently purchased a new Comfortmaker Furnace, the problems is it runs for approx. 4-1/2 minutes, shuts off and then comes back on in 2 minutes. I have had a couple of people check and they said that nothing is wrong with it. Any suggestions on what the problem might be?
Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work
[ 1 Answers ]
I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can... View more questions Search
|