Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding 4 wire service to an existing 3 wire config
[ 4 Answers ]
I'm currently researching wiring a hot tub 240v 4 wire 50amp, but have an older Federal Pacific box as the main. Is there a relatively simple way to change a 3 wire system to a 4 wire where the hot tub connects. Eventually I will dump the FP box and rewire, but now is the time for tubbing :) ...
Adding an outlet to a light receptical
[ 2 Answers ]
Hi, I need to add a 2-conductor (black/white/copper ground) outlet to a light receptical. The light is part of a circuit that powers my shop. It has two black wires twisted together, two copper ground wires twisted together, two white wires connected to one post of the receptical, and a red wire...
Adding an outlet
[ 3 Answers ]
Hi, I would like to place an outlet in the bathroom. Right now I have two swishes that control two different lights, inside the box I have two black wires and two white wires, how can an add an outlet and keep the two lights. Thanks, koky1
Adding outlet
[ 6 Answers ]
I am adding outlet in my kitchen. The circuit is 20 amp and 12-2 wire. Can I add 14-2 wire off 20 amp outlet to new 15 amp outlet? It is only 3 feet between outlets. Thanks in advance.
240 volt four wire in 240 three wire outlet
[ 1 Answers ]
I have a generator that has (2) 20 amp 110 outlets and (1) 240 outlet. The 240 outlet have receptacle for four wire plug but I want to use it in a three 930 wire 240 volt plug at other end. Is this a workable solution? View more questions Search
|