 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My question, could a power surge such as the electrical box connected to the outside ac being replaced and when the electricity is turned back on burn up the compressor? If so could there be documentation to support.
I am having trouble getting the air-conditioner to come on. I have a five wire system very old Williamson thermostat for a Williamson natural gas furnace with an out side air-conditioner unit. The coils are above the furnace connected to it in the basement. I have replaced the old thermostat...
Fan on ac compressor will not stop running until turning off the braeker
I have recently had a York Affinity installed. The fan (outside) on the compressor runs all the time, whether the compressor (for cooling) is on or off and whether the heat is on or off. Where do I start? Thanks a bunch!
I have a new air compressor for my hot rod fabrication. The specifications are as follows, 5.5hp 80gal 24amp 240v. My question is, it calls for a 30 amp breaker and time delay fuse, Type "T". I am running 6/2 wire to supply the unit, it is about 90 ft from the main panel so we ran 6/2 for minimal...
View more questions Search
|
