 |
|
|
 |
New Member
|
|
Apr 1, 2009, 09:16 AM
|
|
How big should sump discharge pipe be?
Hello, I'm replacing (burrying) my sump pump discharge line that runs outside and dispences out in my front yard. Currently there is 1 1/4" coming out of the house. So my question is do I convert that 1 1/4" pipe coning out of the house into 3" PVC or keep it 1 1/4" or 1 1/2" ? Also I intend on having the discharge pipe eventually come back up to ground level to discharge in the yard. Is there some sort of drain cap or protection of some sort I can put on the end of the pipe once it gets to laswn level? Thanks in Advance!
|
|
 |
Eternal Plumber
|
|
Apr 1, 2009, 12:54 PM
|
|
I would increase the discharge to two imches and cap the raiser that you'll bring up to grade withs a vent cap,(see image). Good luck, Tom
|
|
 |
New Member
|
|
Apr 1, 2009, 04:12 PM
|
|
Thanks Tom. What is that in the photo on the far left? If it is a cap for the vent how does it work? So with the vent cap in place the water ends up hitting the under side of the cap and just disperses from there? Thanks again for you answer
|
|
 |
Eternal Plumber
|
|
Apr 1, 2009, 04:18 PM
|
|
It's called a "vent cap". Held in place by the bolts that you see on the sides. The pump pressure will force the water up the raiser, hit the cap and disperse around the pipe. The vent cap is about the best cover I can come up with. Regards, Tom
|
|
 |
New Member
|
|
Apr 1, 2009, 08:07 PM
|
|
Thanks again Tom. Do you think it is necessary to lay pea stone or some type of rock under the drain pipe for drainage? There is quite a bit of good pitch in the yard and I definantly would prefer to just dig the hole , lay the pipe and bury it back in the dirt only?
|
|
 |
Eternal Plumber
|
|
Apr 2, 2009, 05:33 AM
|
|
 Originally Posted by siandjas
Thanks again Tom. Do you think it is necessary to lay pea stone or some type of rock under the drain pipe for drainage? There is quite a bit of good pitch in the yard and I definitely would prefer to just dig the hole , lay the pipe and bury it back in the dirt only?
That depends upon the texture of your soil. If you have a high clay content I would consider putting out some perforated pipe over pea gravel as a disposal aid. If you have sandy soil the flow should percolate back into the ground. Good luck, Tom
|
|
 |
Plumbing Expert
|
|
Apr 2, 2009, 07:11 AM
|
|
It should be 2" to the highest point of discharge run. Then, once it turns into gravity drain, you can go to larger diameter pipe.
|
|
 |
Uber Member
|
|
Apr 2, 2009, 07:56 AM
|
|
There are flush mount pop-up drains. Look at Lowe's or Home Depot. I think Lowe's.
|
|
 |
New Member
|
|
Apr 2, 2009, 08:51 AM
|
|
[QUOTE=speedball1;1642071]That depends upon the texture of your soil. If you have a high clay content I would consider putting out some perforated pipe over pea gravel as a disposal aid. If you have sandy soil the flow should percolate back into the ground. Good luck, Tom[/QUO
Thanks again Tom: I just wanted to make sure I am understanding your advise. So what your suggesting is that once I get to a good pitch where gravitty takes over stop using the 2" PVC you recommended ond go with the perforated (big) pipe? That would be about a 50' run with the perforated pipe?
|
|
 |
Eternal Plumber
|
|
Apr 2, 2009, 11:06 AM
|
|
That sound like a good way to help disperse the outflow. Where would the perforated pipe terminate? Would you still bring it up to grade with a vent cap? Cheers, Tom
|
|
 |
New Member
|
|
Apr 2, 2009, 11:21 AM
|
|
 Originally Posted by speedball1
That sound like a good way to help disperse the outflow. Where would the perforated pipe terminate? Would you still bring it up to grade with a vent cap? Cheers, Tom
Well Tom, that was kind of what my question was for you. If I use the perferated pipe would I still need to bring it to geound level? Thanks again!
|
|
 |
Eternal Plumber
|
|
Apr 2, 2009, 11:34 AM
|
|
 Originally Posted by siandjas
Well Tom, that was kind of what my question was for you. If I use the perforated pipe would I still need to bring it to geound level? Thanks again!
Sorry! It all depends upon how much water you have to get rid of. Small amount? Yeah! I think 50 foot of perforated pipe would disperse the flow just fine as long as your soil would accept it.
Large amount? If water builds up in the perforated pipe And you can spread it around over the top soil I would bring it up to grade and let it spill out. If that's not a optuion I would terminate the pipe at a dry well that you would dig in. The entire thing hinges on the type of soil that you have and how much volume you're asking it to disperse and the only one that can answer that is you. Regards, Tom
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Need an air gap for sump pump discharge
[ 20 Answers ]
My sump pump drainage system was not set up correctly. The 1 1/2 inch PVC pipe runs outside the house, into the ground, and is connected to the storm sewer. I understand it is supposed to drain into a larger pipe (3 or 4 inches) which would allow an air space and more room.
Since there is no...
Frozen Sump Pump Discharge Pipe!
[ 6 Answers ]
I did a search before posting this question, but I only came across bits and pieces of the info I needed.
Background:
I live in NY and my neighborhood has a high water table. I installed a sump pump last year and ran the discharge pipe out through the foundation and into the sewer by the road....
Sump drain pipe
[ 6 Answers ]
Q: I have a sump pump for my basement that pumps out about a gallon of water once or twice a day. I am wanting to pipe the water out into my yard but I don't want a big hole where it drains. I was thinking about digging a hole/ditch at the end of the pipe and putting some rock to fill in the hole....
Washer discharge into sump pump
[ 2 Answers ]
Hello, I just moved into a new old house and I am experiencing problems with my washing machine that are related to an expected plumbing issue. The issue is that my washing machine is causing my clothes to smell very damp and musty despite the fact that they were washed and dried. I believe that...
Tieing in a backup sump pump to existing copper discharge pipe
[ 3 Answers ]
Does anyone know if I can tie in a backup sump pump into an existing copper discharge pipe of 1.5 inches. The back up pump comes with a "y" connector made of PVC. How do I connect the PVC connector into the copper discharge pipe? Thanks.
View more questions
Search
|