Ask Experts Questions for FREE Help !
Ask
    Aljogruber's Avatar
    Aljogruber Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 30, 2009, 06:31 AM
    Kenmore Dryer 90 series stops
    We have a 10 year old Kenmore dryer- a 90 series. It stopped working altogether and we replaced the motor and belt, cleaned out loads of hidden lint, etc.

    Now it will work for intermittent periods. The first two loads after replacement only stayed on for 10 minutes and would not immediately start up again when button was pushed (had a wait period of 15 or 20 minutes then tried again- worked for 10 minutes then stopped again.

    The next morning it wouldn't start at all. Then it dried a load all the way through. Then it would steop after 10 minutes. Then after 20 minutes it would stop for a couple of loads.

    Second day it dried two loads all the way through. What could be going on?
    Flying Blue Eagle's Avatar
    Flying Blue Eagle Posts: 2,056, Reputation: 225
    Ultra Member
    		  
    #2

    Mar 31, 2009, 11:40 PM

    Aljogruber - i believe that you have a bad heat protector that is going bad ; you will have to have a volt ohm meter to test it to find out ;; also you need to check out the {blower$ motor and fan , for proper operation and cleaness, of the .moto
    And fan and the air outlet duct:: oh you can get the volt ohm meter at lowe's or the home depot:: in the electrical dept <for about $10.00 to 12.00 dollars ; make sure you get one that is capatal of handling 250 volts a/c power : havwe a great day and god bless::f.b.e.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Series 90 Washing Machine Stops Before Rinse [ 2 Answers ]

My 1997 Kenmore Series 90 washing machine stops after the agitation and before the rinse cycle. For a while, I have been noticing a delay after the click in the agitatation before the rinse begins. Today there is NOTHING happening? Any ideas?

Kenmore 90 Series Dryer stops mid cycle [ 1 Answers ]

I have a kenmore series 90 electric dryer model number 110.67902790 which is about 10 years old. We replaced the heating element about 18 months ago for the first time because the cloths were not getting dry during the normal cycles. At that time, we did a thourough cleaning of the inside housing...

Kenmore Gas Dryer Stops Heating [ 1 Answers ]

We have a Kenmore gas dryer #110.74642400 that is driving me crazy. The burner will heat and cycle for about 5 minutes in either timed or auto settings but the burner will stay off. I have checked the 3 thermostats with a ohmmeter and they checked OK. The ignitor was replaced as a " shot in the...

Kenmore Dryer stops before dry [ 6 Answers ]

MY Kenmore Elite Dryer, Model 110.63932101 runs normal and then stops before clothes are dry. When you push the button to restart it just beeps. After awhile it will restart but then may shut down again before dry, and you have to wait again. Any idea? I've done some of the diagnostic's on the...

View more questions Search