Ask Experts Questions for FREE Help !
Ask
    brooklyn13's Avatar
    brooklyn13 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Mar 29, 2009, 08:51 AM
    Plexiglass fence top
    I have a four foot stucco wall in my back yard that backsup to a semi busy street. I have seen people put a 2 foot high section of plexiglass type material along top of the fence to make it taller, reduce the noise, and still keep the view since it is see-through. The problem is that I don't know how to install it or where to find it. Home depot has some plexiglass but did not offer how to install it. I don't seem to have the wording right on my internet searches either.

    Is anyone familiar with this? Where should I look? Search? Is itteven plexiglass?

    Thanks,

    KP
    handy123's Avatar
    handy123 Posts: 5, Reputation: 1
    New Member
    		  
    #2

    Mar 29, 2009, 06:36 PM
    Install the plexiglass the same way you would install lattice panels.
    The best way is to buy or make 2x4's with the slots in them
    to hold the panels.You want them loose in the slot or they will break
    when a strong wind comes up.They have to give a little.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wood privacy fence with steel (metal) fence [ 3 Answers ]

Hi, We are planning to put in a 6' wood privacy fence on the sides of our property. We would like to install a metal (steel posing as wrought iron) fence across the front at a later date. My understanding is the terminal metal fence posts would be directly beside but not attached to the terminal...

How do you Cut 1/4" plexiglass [ 5 Answers ]

I would like to cut 1/4" plexiglass without melting it.

Cutting 1/4" plexiglass [ 5 Answers ]

I am constructing artifact display cases. That rquire plxiglas lids. What is thr safest, cleanest method to cut the plexiglass froma 1/4"x4'x8' sheet of plexiglss? They all would be straight cuts...

Plexiglass Backsplash for stove area [ 1 Answers ]

I want to create a glow in the dark backsplash for my stovetop. Any ideas of what paint to use. I would also like it to be embossed in areas. Maybe a combination of paints?

View more questions Search