 |
|
|
 |
New Member
|
|
Mar 27, 2009, 08:32 PM
|
|
XP stuck in a start up loop
I have a desktop computer that is a HP 540J that has windows XP pro. My problem is that it is stuck in a start up loop. I get the screen that asks to start in safe mode and the other options. I have tried all the options on that page and what happens is this: Once I choos an option, I get the XP logo and the status bar and then bam, I am brought right back to the blue boot screen that says esc, F1 help, F10 system setup. No matter what I click, I get stuck in this loop. Can someone help?
|
|
 |
Ultra Member
|
|
Mar 27, 2009, 09:48 PM
|
|
A repair installation should resolve this
Repair Installation
A Repair Install will replace the system files with the files on the XP CD used for the Repair Install. It will leave your applications and settings intact, but Windows updates will need to be reapplied.
Perform a Repair Installation
|
|
 |
New Member
|
|
Mar 28, 2009, 10:57 AM
|
|
Where and how do I get the repair installation CD?
|
|
 |
Ultra Member
|
|
Mar 28, 2009, 01:01 PM
|
|
You just need a XP pro disk and in the steps in the link above will give you step by step - but you do need an XP installation disk (same version as you have, Pro)
If you do not have one handy, see if you would be able to borrow one from someone if possible.
|
|
 |
New Member
|
|
Mar 28, 2009, 09:18 PM
|
|
If I use an XP cd, will I loose all my files that are on the hard drive?
|
|
 |
Full Member
|
|
Mar 28, 2009, 09:22 PM
|
|
Try taking the drive out and hooking it up to another machine as a storage drive and doing a disk clean up defragment and the a disk check
|
|
 |
Ultra Member
|
|
Mar 28, 2009, 09:29 PM
|
|
No, not if you do the repair installation
As mentioned above,
A Repair Install will replace the system files with the files on the XP CD used for the Repair Install. It will leave your applications and settings intact, but Windows updates will need to be reapplied
|
|
 |
Full Member
|
|
Mar 28, 2009, 09:36 PM
|
|
If you do have the ogl cd do try seahwks idea if not try mine or borrow somebodies
|
|
 |
Junior Member
|
|
Mar 29, 2009, 09:43 PM
|
|
Do NOT do a repair install first, use the recovery console to try to have Windows repair itself BEFORE doing a repair install because a repair install kills all user specific settings.
Here's how to use the recovery console: Using the Recovery Console - Helljack6.com
|
|
 |
Junior Member
|
|
Mar 30, 2009, 03:20 AM
|
|
Hi,
You need to repair the windows so, please find out the operating system recovery disk and insert in the CD ROM then, select the repair option.
More details and further steps see the article
Repair XP
|
|
 |
Ultra Member
|
|
Mar 30, 2009, 07:45 AM
|
|
Not here to debate,
It will leave your applications and settings intact,
|
|
 |
New Member
|
|
Apr 5, 2009, 10:33 AM
|
|
Thanks everyone... got the system back up just now
|
|
 |
Junior Member
|
|
Apr 5, 2009, 04:46 PM
|
|
Try starting up in safe mode. If you have any new software or hardware installed on it uninstalls it, if it doesn’t work try and bring the system back to a previous state and if all fails you should try a repair install, you could just follow these instructions on this site for a windows repair install. How to Perform a Windows XP Repair Install
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
My computer is stuck in a boot loop.
[ 9 Answers ]
My computer froze during Call of Duty 4 and would get an error about a System 32 file being missing and wouldn't start up. So I put in the Windows XP Home Setup disk, and used the Fixboot and Fixmbr commmands. When I started up again it gave me a NTLDR error... Long story short I ended up...
91 Toyota Celica won't start stuck in park
[ 3 Answers ]
I just bought a 91 Toyota Celica ST Automatic yesterday. The car drove like a top. I went to start it today and nothing. No noise. No nothing. But I noticed that it's stuck in park. Sometimes, I can get it to move out of park and move into other gears. But then it gets stuck again. I know that the...
Intel computer stuck in POST boot loop
[ 8 Answers ]
Hi all,
Thanks for checking out my problem. I built an Intel D865GBF desktop computer. Initiallaly installed Windows XP sp 1 and all was fine. When Windows XP SP 2 was available I update to it. Everything was running fine for over 2 years, then we got the dreaded BSOD, upon reboot we see the...
View more questions
Search
|