Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Small roof to protect heat pump from snow off metal roof
[ 5 Answers ]
We are getting a metal roof put on our old house. This means that the snow will slide off and land onto our air source heat pump. We need to construct a small roof to protect it. We were thinking of extending the 2 x 6 roof rafters another 4 feet and then having 2 x6 or 4 x 4's going back to the...
Metal Roof over existing shingle roof ?
[ 6 Answers ]
Hurricane Andrew & Gustav has convinced me to put a metal roof. I'm too old to keep patching shingles. I'm undecided : on using treated 1 x 4 lats directly over shingles (parallel to ridge), screwed to rafters and metal screwed to lats or
Deck tables, tributary load, and beam size for deck
[ 4 Answers ]
I am confused with "deck tables" from different sources, specifically concerning beam size for a deck. I am planning a basic deck as shown: 9677 Sources that describe the "tributary load" and "tributary length" would allow me to use as little as (1) 2x6 for the "front beam" (tributary...
Attach gable roof to flat roof
[ 1 Answers ]
We are building a three season attached screenroom. We are uncertain how to attach the gable roof to the present roof (gabled in the opposite direction, so the attachment is on the flat side). We have spent hours trying to locate do it yourself instructions and can only find do it yourself kits...
How can I convert this shed roof to a gable roof?
[ 5 Answers ]
I want to extend this porch out another 8 feet and convert the current shed roof to a gable roof. Is there a framing genius lurking here who can tell me how to make it happen? The conceptual image gives an idea of what I'm trying to accomplish with the porch. See attachments. Michael View more questions Search
|