 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Evap motor has power, works when tested but not in fridge
Maytag fridge m/n MFF2557HEW evap motor p/n 12002744 stopped spinning so I ordered a new one. I have tested it in an outlet and it spins not prob. While installing it and holding it I was shocked so I'm thinking is is getting power but it still won't spin. Any help would be great!! :confused:
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We recently bought a 1976 Ford Motorhome. It has been sitting in storage for 2 years and not even started... After a tune up and new brakes, we re-plummed and gave everything a test run. The only thing that doesn't seem to work is the fridge. It lighs on propane, and we must have ran it for a...
I need to wire this sander for 220 power and do not understand the diagram well enough. Currently I believe it is wired for 110 shown in picture. Please advise about correct wiring for 220. Thank you 2 attachments
What makes a refrigerator run continuously and never cycle off. The freezer part anyway. It's a year old Kitchenaid side by side. I have the temp settings at the warmest setting. I can hear the fridge side go off, but not the freezer. The temp in the fridge is below freezing where it should be...
View more questions Search
|
