Ask Experts Questions for FREE Help !
Ask
    trbr1983's Avatar
    trbr1983 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 25, 2009, 11:46 AM
    Washer inside tub paints
    I need to spray paint a few rust and enamel peeling spots on the inside of washer tub. What paint do I need to use for this?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 27, 2009, 03:20 AM
    No paint will hold up you need to use epoxy and apply as per the instructions.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moving Inside Washer & Dryer to Garage [ 6 Answers ]

I recently purchased a single story home in FL. The layout of the home has the washer & dryer in the hallway. It's a narrow hallway and a small laundry space. The space really isn't conducive for a family with lots of laundry. I was considering moving the washer & dryer to the garage. The...

Kenmore washer is leaking water inside the drum and flooding [ 1 Answers ]

Hello, My Kenmore washer (which is about 7 yours old) started to leak water (inside the drum) long after the load has been done. One day it leaked so much that it flooded the entire garage. I have turned off the water and can not use it till I resolve this problem. Please give me some...

Paints [ 1 Answers ]

What is the best paint 100 Percent Acrylic Dunn Edwards or Frazee?

Kenmore Washer dripping inside tub [ 1 Answers ]

My Kenmore Washer constantly drips inside of the tub after a wash cycle has completed. I have to turn the water off after each wash to stop the washer from dripping. Do you know what could be causing this problem?

View more questions Search