Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
HoneyWell Themostat wiring
[ 3 Answers ]
Hi, Currently I have a Honeywell analog(mercury) thermostat which I'm trying to replace with Honeywell RTH6300B. When I look at the current mercury stat wiring its lot different. I see a red wire connected to unmarked place. I see a yellow wire connected to something marked as "2" and a white wire...
Honeywell RLV4300
[ 1 Answers ]
I have bought Honeywell digital RLV4300 from Homedepot, and want to replace old analog one. I found there is only 2 wire (both are black) out from RLV4300, but there are 4~5 colored wires from old thermostat. Want to know how to connect the wires. Thank you for help.
Themostat replacement(Trane to Honeywell VisionPRO TH8321
[ 3 Answers ]
I have a Trane electric heat pump system Model# 4TECF24B1000AA Manufactured 3/2007It has a Trane Model # TCONT401ANT1MAA thermostat that I want to replace with a Honeywell Model3 8321 Thermostat and am unsure of the wiring can you please help. Trane wiring is: R-Red W2 & X2- Brown with a yeoow...
Honeywell RTH230B themostat / fan
[ 1 Answers ]
The gas forced air FAN comes on the second the Thermostat calls for heating, so cold air blows until the furnace heats up. Not sure if it did this with the mercury switch t'stat (new house to me). Should there be a delay for the fan to allow the furnace to heat up? How do I do that on this...
Honeywell RTH230B themostat
[ 1 Answers ]
I recently bought a Honeywell RTH230B 5-2 programmable thermostat. I seem to have misplaced the manual and therefore am having trouble setting it-- Could someone tell me how to obtain another manual on line for this device? View more questions Search
|