Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Carrier heat pump, outdoor unit fan will not rotate and hum comes from compressor(?).
[ 5 Answers ]
HI, This relates to the outside carrier heat pump unit. Symptoms are: the unit is receiving the signal to turn on from the inside thermostat. The contactor clicks closed (audible). There is a humming sound. I think in is the compressor. The large fan on the outside unit does not rotate. I...
Gas furnace ignites intermittently-ignites after removing cover from ignitor chamber
[ 3 Answers ]
Unit: Carrier WeatherMaker 9200 gas furnace, with an HSI ignitor Symptom 1: Thermostat is calling for heat, as evidenced by a flame icon on thermostat face, but no action in the furnace. Symptom 2: Ignites only AFTER I initiate Action 2 below. Then it seems to work for a while, until the...
Heat pump outdoor unit location
[ 1 Answers ]
I live in central Virginia and am replacing my oil furnace with a heat pump. Is the east or west side of the house better for location of the outdoor unit. I thought west side for heating but not for cooling. Just the opposite for cooling. Please help!!
Heat Pump Outdoor unit makes a 'clicking' noise, what cloud be the cause?
[ 1 Answers ]
I have a Carrier Heat Pump system. I estimate it is 15+ years old. I had it serviced this past summer. (Reversing valve replaced & recharged). The unit has run well since. It now make a 'clicking' sound when the out-door unit is running. There is no mechanical interference that fan blades...
New thermostat, Furnace ignites fire but no heat
[ 3 Answers ]
Hi My furnace and thermostat was working fine until two weeks ago. So I replaced the thermostat and the heat started working for the first day then it stopped. I tried to turn up the degrees on the thermostat and I checked the furnace. The electric ignitor was working fine and there was fire... View more questions Search
|