Ask Experts Questions for FREE Help !
Ask
    ChevyGun's Avatar
    ChevyGun Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Mar 15, 2009, 11:20 AM
    Wiring from Janitrol H/P TO HW Thermostat
    Ok I have a janitrol heat pmp that had a Dico thermostat with the wirs from the unit the
    Letters G Y Y1 W2 R E O AND IM PUTTING ON A HONEYWELL RTH3100C THERMOSTAT AND I Don't KNOW WITCH Y TO USE AND WERE THE GO CAN YOU HELP PLEASE.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Mar 15, 2009, 02:47 PM
    Were the letter designations you listed from the old or new thermostat? If old, were wires connected to both "Y" and "Y1"? If so, you may need a thermostat with capability to control 2-stage cooling.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat wiring diagram; janitrol 7W/honeywell 5W [ 1 Answers ]

What is the wiring layout from the Janitrol hpt 18-60 to the Honeywell RTH230B?

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Janitrol wiring to rth3100c wiring [ 1 Answers ]

I've taken off the cover and the wires are all OK but the black one where does it go to? My heater won't come on (well some times the AC come on with out me turning it on.)

Replacing Janitrol Thermostat with Honeywell Thermostat [ 1 Answers ]

I am attempting to replace my manual Janitrol Model HPT 18-60 thermostat with a Honeywell Programmable Model CT3500 thermostat. My Heat Pump is a Trane TWR012-042C The 6 wires connected to the Janitrol thermostate are: Y, W2, G, R, O, C How do I connect these six wires to the Honeywell that...

Janitrol to Rite Temp thermostat wiring [ 6 Answers ]

I am changing a Janitrol mechanical thermostat to a Rite Temp 8085. And the heat Pump is a Goodman. The wires on my old thermostat are labeled G, Y, E,R,O,W,and C There is no E on the new thermostat. I have hooked the others to the corresponding letters on the new thermostat and left the brown E...

View more questions Search