Ask Experts Questions for FREE Help !
Ask
    STARCHANGER's Avatar
    STARCHANGER Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 15, 2009, 12:57 PM
    Wiring of outside unit
    I have an old addison cen. Air unit and just replaced the compacitor and fan motor.
    I need a wiring scheme because the one inside the unit is not complete.
    Dose anyone know where online I can find one?
    Thank you
    STARCHANGER
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Mar 15, 2009, 01:26 PM

    Look on the motor for capacitor connection, may be very small. Then hook to Contactor load connections.
    What motor do you have?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #3

    Mar 15, 2009, 02:35 PM
    How many/what color wires does the motor have? Is there a wiring diagram on the motor?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring emerson fan motor for outside unit [ 1 Answers ]

I need to how to wire a emerson motor. The old motor and a clip that you plugged in. The emerson has no clip or plug it looks like you have to hard wire it.

Wiring for window unit [ 1 Answers ]

I am installing a 30 amp 250 vac unit unit. The distance from the panel box to the plug will be approximately 110'. I am planning on using 12g wire. Will this suffice or should I use 10g?

Wiring on A/C unit! [ 1 Answers ]

The plug on my A/C unit was not working, it has a built in surge protector that kept blowing. So like the average man thought I could fix that myself. So I cut off the surge protector/plug. When I went to install my own plug, I didn't understand the wiring. All of the wiring was in a main cord, but...

Wiring for a dustless unit [ 8 Answers ]

I have a 15KBTU mini split unit and the data calls out for 14/3 wire to run 220V, 15 Amps to the condenser. This seems kind of light to me but this is what is called for. My run is going to be around 90'-100', should I use heavier wire, say 12/3? Thanks.

View more questions Search