Ask Experts Questions for FREE Help !
Ask
    czuloaga's Avatar
    czuloaga Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Mar 15, 2009, 11:31 AM
    98 hondacivic ex" won't fire up" after simpletuneup
    450don,my last question 4.was about the timing belt" sorry" I forgot to specify-cz
    450donn's Avatar
    450donn Posts: 1,821, Reputation: 239
    Ultra Member
    		  
    #2

    Mar 15, 2009, 05:01 PM

    You do not need to start a new thread for every post and question.
    The fuel shut off is in different locations. Some times they are located in the passengers side kick well. That is behind the panel in the foot well that decorates the right side of the foot well. Other times it is located in the trunk. Your owners manual should tell you where it is.
    As for the spark test. You should be able to remove one spark plug from the head, plug it back in and have someone crank the engine while you watch for spark. Remember to ground the side of the plug to something.
    Generally Honda as I remember requires a timing belt replacement at specific mileage intervals.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

98 hondacivic ex" won't fire up" after simpletuneup [ 1 Answers ]

450don, I have checked and checked everything I did, and nothing, "just cranks"over,I've already replaced coil (napa) got one under $40.00 they have an ignitor (new) for $75.00,do you all think that's next?-cz

98 honda civic ex wont" fire up "after tune up [ 1 Answers ]

Texgreasemonky,would I need to check even the little box type fuses in the 98 honda civic ex that I can't get to fire up,after tune up?-cz and thanks for the tip, I'm going to check tommorrw ,I'm tired of messing with it tonight, and no I I did not disconnect the negative" opps"!

Foster Johnson gas furnace will not "fire up" [ 1 Answers ]

Our Foster Johnston gas furnace will not "fire up" on it's own. We have to "flip" the breaker switch or toggle it off & on with a switch that has been installed behind the heater. When it does finally "fire up" it will "cycle" twice and then back to point A. When we flip the switch it sometimes...

Murray 12 hp 30in mower "No Fire to Plug" [ 1 Answers ]

Hello , I have a murray 12 hp 30 riding mower . The first problem was it would start (turn over) . I brought an ignition switch and installed. The engine now turns over but not getting any spark (fire ) to the spark plug. I then jumped out the safety switches at each switch and changed out the...

View more questions Search