Ask Experts Questions for FREE Help !
Ask
    eddieirby's Avatar
    eddieirby Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 12, 2009, 09:29 AM
    murray riding mower
    good afternoon, I have a murray riding mower (40708x92a) and trying to figure out what size drive belt and deck belt to get. Mower been sitting for a while and had used belt to another mower. Appreciate any hep you can give. Thanks.:confused:
    jsfocke's Avatar
    jsfocke Posts: 310, Reputation: 37
    Full Member
    		  
    #2

    Mar 12, 2009, 01:04 PM

    You need a Murray belt # 037X61MA and a 037X62MA

    The numbers tell what size they are.
    One is a 61" and the other is a 62" belt.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Mar 12, 2009, 01:28 PM

    Try this if you still have questiopns Murray, Inc.
    eddieirby's Avatar
    eddieirby Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Mar 12, 2009, 01:33 PM
    Quote Originally Posted by jsfocke View Post
    You need a Murray belt # 037X61MA and a 037X62MA

    The numbers tell what size they are.
    One is a 61" and the other is a 62" belt.
    Thank you for your response, will try that, thank you very muck
    jsfocke's Avatar
    jsfocke Posts: 310, Reputation: 37
    Full Member
    		  
    #5

    Mar 17, 2009, 02:49 PM
    Quote Originally Posted by eddieirby View Post
    thank you for your response, will try that, thank you very muck

    You're welcome very muck.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray Riding Mower [ 3 Answers ]

My 1988 Murray mower worked fine last week... but I jumped on it this week and couldn't get it to turn over. Replaced the battery, but that didn't seem to help. Tonight I replaced the solenoid tonight, but that didn't seem to help. I'm getting nothing when I try to turn it over. Any advice? This...

Old Murray riding mower [ 8 Answers ]

I bought an old Murray riding mower last year. I'm not sure what year it is, but here is my problem: One of the rear tires has a flat, instead of loading up the whole mower in the back of the truck, I wouldm like to remove the wheel. I removed the holding pin and the washer from the outside of the...

Mower Replacement Belt, Old Murray Riding Mower [ 2 Answers ]

I have a model 38618X92E. I am looking for a manual or parts catalogue for this model so I can find the proper replacement belt. Thanks.

Murray Riding Mower [ 1 Answers ]

I have a 15x38" Murray. My drive belt keeps coming off. I got a new 73" belt from Outdoor Lawn Equipment. I can't get the belt on the back large pulley. The pulley is blocked by other parts. Can anyone help?

Murray Riding Mower [ 1 Answers ]

I have a murray riding mower that I purchased in August of 1991. Apparently I need a new transaxle because it will not go in gear at all. The part # in the book is Dana model 4450-1 which I have been unable to locate, the only reference I have come across for the part says that it has been...

View more questions Search