Ask Experts Questions for FREE Help !
Ask
    Electrolux's Avatar
    Electrolux Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 9, 2009, 08:11 AM
    ElectroluxE-2000 vacuum cleaner
    The motor makes a funny noise and the brushes make sparks. How to get access to the motor to check the bearings, etc.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 9, 2009, 01:36 PM
    Usually this work is left to a vac pro since you probably need to replace the brushes and springs. Many times the brushes have to be ground out to match the comutator.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dyson vacuum cleaner fault [ 5 Answers ]

Our Dyson DC01 vacuum cleaner has lost its suction. It goes, but will not pick up anything. Any suggestions please (no, not those types of suggestion!)??

Strong smell when using my vacuum cleaner [ 4 Answers ]

After using my vacuum cleaner for 15 minutes, I started to notice a strong smell, it's not a burnt smell, and the vacuum cleaner seemed to still work, although I turned it off immediately. This has happened 2 times. The bag inside isn't full, and the vacuum cleaner isn't hot at all. How likely...

Vacuum cleaner woes [ 1 Answers ]

Hi all, I have a Bissell model 3594 bagless vacuum. The handle release pedal Has broken. I found the part, but my problem is removing the old Pedal and putting the new one in. Thanks in advance. Andy

Henry vacuum cleaner [ 4 Answers ]

The low power switch does not work , but the high one does. >Moved from Forum Help<

Best vacuum cleaner? [ 2 Answers ]

I am thinking about buying a new vacuum cleaner and would like a recommendation on one that you have found to be good at really suctioning up the dirt. Price is not a factor.

View more questions Search