Ask Experts Questions for FREE Help !
Ask
    helpkar's Avatar
    helpkar Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 9, 2009, 01:12 PM
    Self-piercing water shutoff valves OK?
    I need to connect my household water supply to my new Frigidaire refrigerator, using 1/4" copper tubing. The kit I bought from Home Depot contains a self-piercing saddle-type shut-off valve. However, the instruction manual that came with the fridge says "DO NOT use a self-piercing type shut-off valve". Why, what is the downside of this type of valve?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Mar 9, 2009, 01:32 PM
    They are not the best to use but I have them on my icemakers with no problems.
    jywinges's Avatar
    jywinges Posts: 1, Reputation: 1
    New Member
     
    #3

    Aug 31, 2010, 08:40 AM
    Here in Plymouth MN SADDLE VALVE self-piercing are not code, have to use solder type. I went to plumbing store they would not sell them. Not plumbing code

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shutoff Valves Leaking [ 1 Answers ]

Hi, I had to turn off the main shut off valve in the house to fix a problem. When I turned it back on, it has a continuous drip. Is this common and do I just need to wait it out? I noticed similar problem with other shut off valves in the house. I'm worried about a flood!!

Main water shutoff value doesn't stop water completely [ 1 Answers ]

The main water supply line shut off value is located in our basement. I've already changed it once. The problem is water is getting through the value even when it's tightly shut off. So in the winter, after draining the pipes, water continues to seep through, then I have a problem with freezing...

Shutoff valves on shower supply [ 1 Answers ]

Can shutoff valves be installed to a tub & shower supply valve lines? Will I be disappointed in water flow volume using 1/4 turn non-full-port ball valves? What would be recommended? Thanks Added: The valve in question is a BrassCraft KTR14C1 1/2" Nom Sweat Inlet 3/8" Comp Outlet. The...

Water shutoff [ 4 Answers ]

I will be out of town for a month or 2 and am going to shut the water off at the shutoff valve in the house. I have a couple of old connections that leak and need repair but won't be able to get to them until I get back. Is there any need to drain the pipes & hot water heater ? Thanks

Hot water shutoff? [ 11 Answers ]

When I started to replace a bathroom sink faucet the hotwater shutoff valve broke (cheap plastic) so I can't shut off the hot water under the sink. What should I do? Is there a way to shut off hot water to the house while I replace the faucet then turn back on, or do I have to drain the hotwater...


View more questions Search