Ask Experts Questions for FREE Help !
Ask
    alta's Avatar
    alta Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 8, 2009, 10:27 AM
    Thermostat honeywell RTH5100b
    I want to change my old thermostat for they RTH5100b and the old one got only two wires white and black and no letter.
    Where the wires goes on the new one
    Mikie D's Avatar
    Mikie D Posts: 45, Reputation: 1
    Junior Member
    		  
    #2

    Mar 12, 2009, 06:46 AM

    If there is only two wires on your tsat put the wires on rh(should be a jumper on Rh&Rc( and the other on w and if you have a/c if you have a main control switch on the furnace or a/h that switch from ht or a/c your OK good luck Mikie D
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell rth5100b thermostat [ 2 Answers ]

My son in law god bless attempted to change the thermostat from an old honeywell mercury themostat to the above model but neglected to label the wires. We can get it turn off and on but the unit continues to run outside. What are the proper connections Thank you.

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Changing over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...

How do I wire my new honeywell thermostat replacing the old tempstar thermostat? [ 1 Answers ]

I am replacing my old thermostat. The old is a TEMPSTAR, the new is a Honeywell model # RTH7500. When I use the directions I end up with one left over wire. We called the Honeywell hotline, the rep. said to wire it like this: red to R, white to O, Yellow to Y, Blue to C, Green to G, Orange...

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

View more questions Search