Not your question?
Ask your question
View similar questions
Check out some similar questions!
Wire conversion for 2-stage heat/1-stage cool thermostat
[ 1 Answers ]
What is the conversion for wire connections from a Lennox to a White-Rodgers 1F72-151. The old connections were: G, W1, W2, Rc, Rh, Y1 and Y2. The new connections are: W2, E, O/B ,R ,L ,G, C and Y
Auger Diagram for two stage
[ 2 Answers ]
I have a Sears Craftsman Eager1 Snowblower (2 stage) and I can't figure out how to put the auger belt on. I have a 38" belt which by the model number (536 90570) is correct. The guy I bought the blower from put an 8 horse on the machine instead of the 7 horse which was on it originally (I think)....
Hvac1000: Or ing stage relays (multi-stage stats to single stage)
[ 1 Answers ]
Would you agree that you can and should OR the outputs of say a 2 stage heating stat to make it a single stage? OR means connect the outputs together. Example: Connect W and W2 to create a single stage stat. I'm under the impression that either W1 or W2 is activated and not both and that this...
White rogers thermostat 2 stage heat 1 stage cool
[ 6 Answers ]
Anyonw know how to hook this up with a dpdt relay There is 5 wires , outdoor heat for stage 1 heat , propane gas for stage 2 hear Thanks For any help :confused:
White rogers thermostat 2 stage heat 1 stage cool
[ 1 Answers ]
What is the right wiring to hook the WHITE ROGERS 80 SERIES thermostat up ( 1F82-261)? I have a outdoor wood burner dlowing hear to a exchanger in the ducts , and I have propand gas as a back up sorce The furnace is a coleman evecon ( 94 model) with ac (up draft) I think I had the wiring... View more questions Search
|