Ask Experts Questions for FREE Help !
Ask
    Raymond1's Avatar
    Raymond1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 3, 2009, 08:46 PM
    Furnace work no heat
    The furnace is working fine however, the heat got weaker and weaker over several weeks and now there is no heat at all and the furnace come on flame is blue there is no heat at vents only cool air.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Mar 3, 2009, 08:50 PM
    Brand/model#? Natural gas or LP?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The Heat and A/C do not work. [ 1 Answers ]

My Honeywell thermostat battery was low. In removing the thermostat, I did not realize that there were two screws holding it to the baseplate. Therefore, I yanked it out of the wall and noticed sparks where the wires were connected to the terminals. I finally removed the thermostat and replaced the...

A/C working, switched to heat, now ac and heat don't work [ 1 Answers ]

Hello, Replaced my thermostat in the summer, everything worked good,switched the new thermostat to heat for the first time, now neither the A/C or heat work? Any Ideas? Andy

Car Heat and A/C Won't Work [ 7 Answers ]

Hi, I have a 1997 Ford Taurus. Yesterday, when I turned on the A/C, it didn't turn on. No blower, maybe some cold air? nothing. Then, after turning the dial several times, it DID turn on. Now, as of today, nada, zilch. No A/C and no heat. No blower either. What is broken, do you think? Do I need a...

AC or Heat does not work when switching to AC or Heat [ 3 Answers ]

I have a programmable thermostate installed a year ago and it has been working since until a few days ago. Both AC and Heat don't work , I don't hear any kicking. I did a reset on the thermostate did not make any difference. The fan is on Auto. Now I am interested in knowing if it is the...

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

View more questions Search