 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
KISS is correct. This link will show you how it works in more detail. How a water heater dip tube works and what it looks like. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
First: Does the breaker have to be on for my water heater to fill up? I turned the breaker on after draining it a little, and it isn't filling it back up... Second: How long should I have to wait for my water heater to heat the water again?
The old water heater died. Bot one (38 gals) at HD. Installed exactly like the old one was as follows--3 CPVC pipes come out of wall. Two are joined. Before they are joined one has a valve. After they are joined there is a second valve. The pipe is connected to the cold side of the heater using...
Wiring diagram to wire an electric hot water heater to breaker panel
My new hot water heater has 3/4" pipe connections, can i use a 3/4"pipe to 3/4" PEX brass adapter with an inline Pex 3/4" ball valve, or is there a reason I see some folks installing brass or bronze extensions? My pex manifold is less than 3 feet from the water heater and will use 3/4" pex line to...
On Thursday, December 6th, 2007 our pump house for our well froze up. When water was finally restored my hot water heater didn't work. I get nothing, not a gurgle or grind. When I turn on the hot water spigot water comes out so I know water is flowing through the hot water heater, but it is not...
View more questions Search
|
