Check out some similar questions!

suziyl · Mar 1, 2009, 04:40 PM

Ok, I tried what Milo recommended for my leaky kithen faucet. WD-40 and left it on over night so when I tried to take the screw out of the handle, the handle broke in 3 places, then the screw did come out. Now I have let WD-40 soak on the packing nut, and it will not loosen up at all. What do I do now? I need help please, can't afford a plumber. Thanks to anyone who can help.

mygirlsdad77 · Mar 1, 2009, 04:53 PM

Going to need to know what the original question was, and pics of the problem area would help. Where is the faucet leaking etc etc.

suziyl · Mar 1, 2009, 05:38 PM

The faucet is in the kitchen sink. The hot warter one is leaking around the packing nut. I can not get it off. I have tried WD-40 on it all night, but still won't budge. Thanks for any help. The faucet is about 20 yrs old a Moen.

massplumber2008 · Mar 1, 2009, 05:46 PM

Hi Suziyl:

What tools are you working with? You should have a large pair of pliers or a crescent wrench...see pictures.

suziyl · Mar 1, 2009, 05:56 PM

I have an adjustable cresent wrench, a phillips screwdriver, an overhead light and new faucet washers to replace the old when I get to that part. I have lots of tools available to me if I need them. Tks

massplumber2008 · Mar 1, 2009, 05:57 PM

Try a pair of pliers here... or a small wrench. Let me know what happens.

MARK

suziyl · Mar 1, 2009, 06:09 PM

I got it thanks. All

massplumber2008 · Mar 1, 2009, 06:10 PM

:)

suziyl · Mar 1, 2009, 06:22 PM

Thanks Mark, just got it. Trying to be your own plumber, electrician is hard, but I am persistent. Have a great night

massplumber2008 · Mar 1, 2009, 06:24 PM

Indeed, you are persistent... we appreciate that quality around here!

Be safe (especially around the wires... ;)).

Good night!