Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Grounding a fixture to wire w/ no ground
[ 1 Answers ]
Hello. I am replacing a bathroom light/exhaust fan. The previous llight had no ground wire and the wire leading to the unit has no ground. The new unit does. How do I ground the unit? Thanks for your time E
Grounding wire pigtail
[ 1 Answers ]
I just changed an exterior light on my older home. I connected the house grounding wire with the light grounding wire. But, the directions mentioned a pigtail grounding wire (not included of course) and there is a green grounding screw on the metal plate. So do I need to get/install a grounding...
Two-wire conduit grounding
[ 1 Answers ]
My new furnace has metal box with an electrical plug and switch on the side. Three-wire conduit (with black, white and green wires) runs from that box up to an overhead light with a metal box. An older piece of two-wire conduit (with black and white wires) runs from the light to the breaker box. ...
SPA disconnect switch grounding wire requirement
[ 1 Answers ]
I'm installing a 240V/60A SPA approximately 85 feet from the house service panel. I'm going to run 3 individual #6 conductors (THN or better) from the service panel to the SPA GFI disconnect box via 1 inch PVC conduit. The SPA is about 7 feet from the disconnect box. The disconnect box instructions...
Hard wire 3 wire to 4 wire 220 service
[ 1 Answers ]
How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ? View more questions Search
|