Ask Experts Questions for FREE Help !
Ask
    jsaia1's Avatar
    jsaia1 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 25, 2009, 08:49 AM
    How do you install a mixing Valve on a oil fired heater?
    My service tec said my water temperature in my house will be consistence and won't be to hot or cold if I install a mixing valve on the heater. Would I still need a mixing valve if I install a Tankless Heater?
    Thanks,
    Jim-PA
    [email protected]
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 25, 2009, 09:40 AM

    Are we talking about your domestic plumbing and faucets or a heating system?
    jsaia1's Avatar
    jsaia1 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Feb 25, 2009, 10:17 AM
    Yes Domistic plumbing to heater instillation
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Feb 25, 2009, 12:50 PM
    For domestic water

    http://customer.honeywell.com/downlo...roch-LoRez.pdf

    Water Temperature - Honeywell Your Home Expert

    For a hot water boiler



    Professional install required for both style devices. See your local HVAC or plumbing expert. This is because there are way to many different designs of systems so trying to describe how to do it would be impossible on a board like this.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

To install Unitrol Gas valve in a water heater [ 8 Answers ]

Hi guys , To install a unitrol shall I leave the wrapped plastice on probe or just take it out and toss it ? What kind of wrench shall I use , a grip vise is possible Thanks for a quick answer

Mixing Valve [ 1 Answers ]

Okay I know nothing so where can I find the mixing valve on my shower to see if it needs cleaned out?

Shower mixing valve [ 4 Answers ]

I have two bthrooms back to back, and all fixtures have ample hot water except one shower mixing valve. It is a temptrol valve. I have replaced the stem twice, replace the seats, cut the water lines in the basement to see if there was a blockage in the piping but cannot seem to find the problem....

Mixing valve reversed [ 4 Answers ]

Hi, Just completed converting a bathtub to a shower, the new mixing valve for some reason has the hot and cold waters reversed, any suggestions how to fix this, the sink was removed during the remodel and is reversed also but I can just swap the h and c off the faucet knobs, not sure what to do...

View more questions Search