Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ground floor rads not heating top floor are fine
[ 1 Answers ]
The ground floor rads do not heat up but the top floor rads are all working fine:
Converting a tile floor to a stained concrete floor
[ 2 Answers ]
I am thinking about taking up the tile in my kitchen and staining the concrete underneath it, but I don't know if it will be possible to get up all the stains left on the concrete from the tile. I do not want to take up the tile if there is too much of a possibility that the tile stains won't come...
Spongy floor joists causing sagging floor
[ 3 Answers ]
Hello. In front of my fireplace there is a small tiled area. This is surrounded by hardwood which runs throughout the living room. The floor on the sides of the tile has dropped slightly below the level of the tile (about 1/8" or so). The wood floor around the tiles is also a bit spongy when...
Proper underlayment for vinyl floor starting at floor joists
[ 2 Answers ]
What is the proper way to build up a floor to prepare for vinyl flooring? I'm building a mud-room in the garage attached to the house, 5' by 13' . Presently I have the joists installed and am ready for subfloor. I am planning to use 3/4" T&G UDL plywood, glued to joists with construction... View more questions Search
|