Ask Experts Questions for FREE Help !
Ask
    7up's Avatar
    7up Posts: 180, Reputation: 1
    Junior Member
     
    #1

    Feb 20, 2009, 01:36 PM
    Engine problems
    I have a 72 gmc pickup with 350 small block the problem I am having is when I stop at a stop light the engines idle drops real low and almost cuts off so can anyone tell me what needs to be adjusted to bring the idle back up when stopped.also when stopped or slowing down my truck starts shaking real bad.
    chrissymarie's Avatar
    chrissymarie Posts: 563, Reputation: 53
    Senior Member
     
    #2

    Feb 20, 2009, 01:47 PM

    Have you checked the fuel line? My volvo used to do that when anything but premium gas was put in. It maybe be clogged but I don't know much about cars.
    maxpinck1's Avatar
    maxpinck1 Posts: 28, Reputation: 3
    New Member
     
    #3

    Feb 20, 2009, 06:25 PM

    Check for a vacuum leak, also at a normal idle without giving it gas, do it have the same problem or it is at a normal idle. You can check for a vacuum leak with a spray bottle with water in it and spray around the area were they are vacuum lines. This is a carb fuel system?
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #4

    Feb 21, 2009, 11:43 AM
    Quote Originally Posted by 7up View Post
    i have a 72 gmc pickup with 350 small block the problem i am having is when i stop at a stop light the engines idle drops real low and almost cuts off so can anyone tell me what needs to be adjusted to bring the idle back up when stopped.also when stopped or slowing down my truck starts shaking real bad.
    Is this a new problem with your truck or did you just do a rebuild on the engine/carb?

    First, the maintenance must be complete, you know what I mean?
    Once the engine is at normal temperature and all loads are turned off, adjust the "Normal" idle screw and use small incremental adjustments to achieve the best results.

    Name:  1a.jpg
Views: 57
Size:  77.6 KB


    Secondly, more info about the "shaking real bad" issue: does it feel like the engine is causing the shake?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2006 F-250 with engine problems [ 2 Answers ]

I have a 06 F250 6.0L with what I think is a fuel injection problem, or a mother board problem. I've read a great deal of web answers to peoples similar problems and they all seem to aim at the fuel delivery system. My truck will blow white or black smoke, and often lose power. It seems to me that...

Lawnmower engine replacement problems [ 5 Answers ]

1. Does anyone know where I can get a wiring schematic for a 6216 Simplicty tractor? The parts manual shows some wiring parts but not detailed enough for my use. Local Simplicity dealer/repair shop does not have any. Don't know if simplicity manuf. Would give any from their archives. 2. I am...

12 HP Engine Problems. [ 2 Answers ]

Hi I'm from NY and generally know a lot about engines. I have 4 riding mowers, all with B and S engines. Dilbert

Engine and tranny problems, maybe comuter? [ 1 Answers ]

I am having some trouble figuring this one out 100%. I have just recently swapped engines in my 1989 gt cobra (Ford Mustang). The engine that was in it was a 5.0l HO V8, but the engine that I have just recently put in it is just a regular 5.0l v8. I bring this up because I believe that my problem...

Engine problems [ 4 Answers ]

Answer this when I start my nissan altima 1995 it runs until I hit the gas when I do that it starts to bog down and when I let of the rpms start to bounce then it dies


View more questions Search